Welding Fume Management

Keep your Workspace Safe & Compliant!

Where to Start:

ENSURE YOUR WORKSHOP MEETS THE LATEST WELDING SAFETY STANDARDS

STEP 1

PARTNER WITH US TO ASSESS YOUR SITUATION

In collaboration with HSE Australia, we'll conduct a thorough, independent assessment. All collected data is analysed in a lab and results will be provided to you in a detailed report.

STEP 2

IMPLEMENT SOLUTIONS

Based on your assessment, WESS will work closely with you to implement the most effective solutions tailored for your workshop's specific needs.

In 2017 the IARC (an agency of the World Health Organisation) announced a ruling in relation to welding fume being reclassified from Group 2B Possibly Carcinogenic to Humans to Group 1 Carcinogenic to Humans.

Federal and state regulations set out the responsibilities of manufacturers, employers and employees. With respect to welding and allied processes the following requirements apply.

Employers: Persons conducting business or undertakings must:

• Develop and subsequently maintain a register of all hazardous chemicals used or produced in the workplace. This may include consumables, welding fume or any other hazardous chemical in the workplace

• Maintain a collection of SDS also known as MSDS (material Safety data Sheets) as part of the register. This register must be available for reference by all employees

• Ensure a suitable and sufficient assessment is made of the risk to health created by welding fume or other hazardous substances

• Revise the assessment at least every 5 years or if workplace conditions change significantly

• Provide training to all employees with the potential for exposure to welding fume

• Keep records of training and assessment. Reports must be available to employees to whom the assessments relate

• Provide health monitoring for employees assessed as being exposed to a significant health risk in the course of their employment duties

• Undertake monitoring where the need is indicated in the assessment

• Ensure that exposure of employees to hazardous chemicals is prevented or adequately controlled to minimise risk to health. Exposure must not exceed the relevant exposure standards

• Ensure that engineering controls and safe work practices are effectively maintained
   

Employees are required to:

• Cooperate with the employer to ensure that activities within the workplace comply with the statutory requirements

• Report promptly to supervisors/managers any matter that might diminish the employer's ability to achieve compliance
   

In compliance with National and State WHS Regulations, conduct a risk assessment to ensure that the welder and people working nearby, are protected from exposure to fume from welding and welding-related processes (including thermal cutting, gouging etc.). The following actions should be considered in the risk assessment:

1. Where practicable, remove the welder from the source of the fume by mechanising or automating the welding process.

2. Arrange the work piece so that the welder's head is not in the plume.

NOTES: (i) Unless welding in the horizontal (PC or 2G), overhead (PD, PE, 4F, 4G) or vertical (PF, PG, 3F, 3G) position, the welder's head is likely to be positioned within the plume, and fume management methods or personal protective equipment (PPE), or a combination of both, may be required. (ii) All welding processes generate fume. The plume may not be visible to the welder or with some processes, the observer.

3. Relying on a light cross-draught in the vicinity of the welder's face to ensure that the fume is either drawn or blown away from the welder's breathing zone can be unreliable. Whilst mechanically assisted ventilation (e.g. a fan) can be utilised, cross draughts sufficient to disperse fume may cause weld quality issues. Other fume management equipment such as fume extractors (e.g. fixed, downdraft or portable) may be required.

4. Utilise personal protective equipment such as respirator masks and air fed helmets (PAPR) if alternative methods of fume control are not reasonably practicable. Care should be taken to ensure that other workers are not exposed to the fume by allowing it to accumulate in areas away from the welding or welding related process.

DOWNLOAD HERE

DOWNLOAD HERE

DOWNLOAD HERE

DOWNLOAD HERE

DOWNLOAD HERE

DOWNLOAD HERE